How to record damage on rented equipment and charge for it without arguments
Almost every dispute with a rental customer ends in the same question: was the damage already there or did it happen on site? The only answer that works is evidence taken at the moment of check-out and return.
Updated1. Inspect the same way at check-out and at return
If check-out and return are checked with different criteria, the comparison is useless. Record the same things both times: photos, hour meter, fuel and notes. On return, also go over specific items that are marked as good or bad, with a note when something fails.
2. Dated photos, always
Take photos of the whole machine and of the areas that tend to get damaged. What matters is that they stay tied to the contract and its date, not loose on the phone of whoever dispatched.
3. Hour meter and fuel
Log the hour meter reading and the fuel level at check-out and at return. They are the two data points that generate the most charges and the easiest to measure.
4. The deposit, agreed from the booking
Agreeing the deposit at booking, and recording when it was received, avoids negotiating at the end. When the contract closes, the deposit is returned or applied to the charges.
5. From damage to charge to maintenance
Every item that failed on return should become a charge with its amount and, if the machine is not in condition, an entry into maintenance so nobody rents it out broken again.
How Alquidiario solves it
In Alquidiario check-out and return carry photos, hour meter and fuel, and the return adds a checklist. The system suggests the charges for extra hours, fuel and damage, manages the deposit until it is applied or returned, and can send the machine to maintenance from the return. You can try it in the demo without creating an account.